Blog posts

Connecting your roast machine to Cropster quickly and easily

So you’d like to take your roasting to the next level? Here we will discuss the different ways you can hook up your machine to Cropster.

Let us start by saying: If you can roast with it, you can use Cropster with it.  Here is a list of just some of the roasters that we have connected to Cropster already:

Giesen - Loring - Diedrich - Probat - Coffeetool - Proaster - San Franciscan - IMF - Bühler - Toper - Has Garanti - Atilla - Garanti - Petroncini - Joper - US Roasters - Gothot - Ambex - STA - Renegade - Brambati - Huky - Quest - Coffee Tech - Roastmax - Victoria - Bella Taiwan...

With that being said, let’s go over how you may go about doing this with your machine.

Method One: Plug & play

Cropster provides plug & play, no-hardware solutions for the following roast machines:

  • Loring Smart Roasters
  • Giesen Coffee-Roasters built after June 2014 (ex. W15A)
  • Coffee Tool Roasters with a PLC

These machines do not require any more setup than simply plugging an ethernet cable directly from your roaster to your computer (although some manufacturers do charge for an unlock code to do this). By doing so, we connect to the machine’s computing unit directly. This setup process takes seconds. 

Also, many new machines (Proaster, San Franciscan, Diedrich etc.) come standard issued with connectors which makes the setup process as simple as connecting your roaster and computer via USB cable.

Method Two: Via the Cropster Connector

Connecting via the Cropster connector

Good news! You’re about to learn a few interesting things about your roast machine. First, Cropster can integrate with any other roaster that has ungrounded thermocouples (K, J, E or T type) or RTD temperature sensors via a Cropster connector - what does that mean? Read on. It’s simpler than it sounds. These terms cover 99% of the roast machines we know of. The Cropster Connector is a small device that can track up to four temperatures at the same time which equates to either one production roaster or multiple barrels on a sample roaster. Hooking up your roaster to this connector is quick and easy and takes 30 minutes or less including time for a coffee. 

Here is a little bit of information on each type of setup. 

A) Ungrounded Thermocouples: K, J, E and T

The vast majority of drum roasters use K or J type thermocouples--K type being the more popular of the two.  If you aren’t sure what type of thermocouples you have, send us a photo of your probe wires (similar to the photo below) and we’ll tell you what you have. To find them, simply locate your temperature probe and follow the wires from it to the other end. Then take a photo of the wires at their connection point. Their colors will tell us more about their type and let us know what type of wire we might need to send for you to extend this connection to the Cropster Connector.  Also, to speed up the process, please let us know the make and model of your roaster, and the year it was produced.

K type thermocouples

Above: K type thermocouples in a Probatino. The green/white insulation colors indicate that these probes are manufactured to European standards and are K type.

Another example for K type probes

Above: Another example for K type probes. Red/yellow colors indicates American standard K type probes 

B) RTD Sensors: PT-100/PT-1000

Unlike thermocouples, extending an RTD probe signal from a digital readout and feeding it into our Cropster Connector is bit more complicated. Bypassing your current digital readout can affect emergency shutoff and alarm systems in some machines. Because of this, we recommend installing a replacement dual/duplex probe. That way you gain an extra set of leads dedicated to Cropster while the other set feeds into your existing system. We believe this is a win-win for you. Dual probes can be sourced pretty easily at reasonable prices.

A standard RTD connection in a refurbished old roaster

Above: A standard RTD connection in a refurbished old roaster. RTD wires typically have 2-4 wires per readout with red/white insulation and only require 2 for a Cropster readout.

If you can roast with it, Cropster can help you get more from it.

Connecting your roast machine to Cropster is the first step toward leveraging green coffee and roast production management tools, roast profiling tools, roast compare reports and QC features. The minutes invested in connecting a roast machine to a tool like Cropster will pay off every time you use the machine and every time you work on a process around the machine. That’s the beauty of connecting your roast machine to a system that can grow with you and your business.

Still happier handling the beans than dealing with the tech?

We have a support team standing by who are more than happy to walk you through the entire setup process. We will even help you source replacement probes and hardware if you need it! Just contact us and we’ll get you up and running asap.

その他のニュース

New releases

生豆カーブ予測で未来を見抜く

インテリジェント豆温度と人工知能(AI)に基づくRoR予測を特徴とするロースティング・インテリジェンス最新バージョンのリリースを当社はとても楽しみにしています。 これからはローストの進み具合を事前に把握!

 

続きを読みます
New releases

ロースティングとAIで大事な事柄が:1ハゼ予測です

ロースティング インテリジェンス 4の最新のアップデートにより、クロップスターは人工知能(AI)に基づく1ハゼ予測を皆様にお届けします。1ハゼが発生する可能性が最も高いタイミングをを示し、それに応じて焙煎を計画できます。 全ての詳細をお読む。

続きを読みます
Roastery   -   Blog posts

あなたに最適な温度上昇率 (RoR) は?

温度上昇率に関する沢山の質問がクロップスターに寄せられています。 コーヒを愛する私たち技術者は温度上昇率に精通しています。 私たちのテクノロジーに関する専門知識はロースターの成長に繋がると確信しています。 彼にはコヒーに関する幅広い専門知識も欠かせません。 結果とし、私たちは世界的なリーディング コーヒー エキスパート達と連携をとりました:Anne Cooper、 Rob Hoos,、そして…

続きを読みます

ニュースレターを読む

以下のソリューションの詳細をみる