Roast   -   Blog

What probe type is it?

A practical guide to figure out what is installed on your machine. As a coffee roaster you can come to a point where you need to know about the type of temperature probes that are installed in your machine. Sometimes probes just go bust, and need to be replaced.

Sometimes you might want to connect a second readout (e.g. Cropster) and you want to get a DUAL version of the installed type. The way to find out your probe type is not 100% straight. But following a few tips and tricks you should be on the fairly safe. First, let's narrow down the potential probe types.

Standing before a probe - So what type is it?

Which probe types are common?

There are two families of temperature sensors used in roast temperature monitoring: Thermocouples: Common types are J/K/T/E. They can be ungrounded (recommended), grounded or exposed Resistance Temperature Detectors (RTD): Common types are PT-100 and PT-1000 In roasting you will mostly find either thermocouples of type J or K or RTD of the type PT100 installed. Other types are very uncommon. So just 3 different types? Should be easy to find out what is what. Actually, it is not too complicated if you know where to start. But from the outside it is impossible to tell. So you want to focus on other hints like the label (with version numbers), number of cables, color of cables, writings on the connection board or digital display.

7 Steps To Your Probe Type Conclusion

1) The New Machine

If you have a new machine, ask your supplier what is installed. Nowadays the probe business is quite organized. Suppliers usually install just one specific type per machine version.

2) Label On The Cable

Open the electro box of your machine and see where the thermocouple comes in. (Please do not change anything as this might interfere with the warranty of your supplier.) Please check! If you find the thermocouple cables, have a look if there is any label attached. If so, search for the version string in Google.

The label. There it is! Good, we can google that!

3) Connection Port Signs

Have a look where the cables are connected. Check what is written there. If you see a "Resistor"-icon you would have a RTD, if it says +/- or TC , you have a thermocouple.


OR

4) Label of Digital Display

If your board or digital display (where the cable is connected) has a version number, google it and see what type it suports. Some support RTD and thermcouples, but at different ports. Check how your connection ports are used.

5) Number of Wires.

This is rather simple. Thermocouples have 2 wires, RTDs 2-4. So if the number is bigger than two, you probably have an RTD.

6) Thermocouples: Lead Colors

There is a color coding scheme for thermocouples. Unfortunately there are two: World ISO Code and US/Canada. The standards are: Oddly enough, sometimes the color standards are not complied by the probe manufacturers - or probes manufactured in or for a foreign country using their standards.

7) Grounded or Ungrounded?

For roast temperature monitoring, grounded probes can be too sensitive. How do you find out whether you have grounded or ungrounded probes? The 100% safe way is an ohmmeter ;-) The more pragmatic solution is to just connect it with your preferred reading device. If the reading shows spiky curves or temperature values the probe will be grounded. We recommend replacing it for an ungrounded. We hope this blog entry helped you. If you have suggestions on how to distinguish types, please let us know. Is there a good color code scheme for RTDs?

새 소식 더 보기

Release

빈 커브 예측 기능을 통해 앞으로 일어날 일을 확인해보세요.

인공지능(AI) 기반 지능형 빈 온도 및 RoR 예측 기능이 있는 새 버전의 로스팅 인텔리전스를 출시하게 되어 매우 기쁩니다. 이제 로스트의 변화 추이를 미리 확인할 수 있습니다.

더 읽기
Release

가장 효율적인 로스팅 일정 만들기

모든 발주 내역을 한데 모아 재고와 비교하고 머신 및 작업 일정을 확인하는 것은 로스팅 일정 및 생산 계획을 수립하는 데 있어 매우 중요한 일입니다. 당사는 이 과정에서 많은 시간이 소요된다는 것을 알고 있습니다. 최신 릴리스를 사용하면 크롭스터에 주문 정보를 입력하거나 Shopify 계정을 통합하여 로스트 일정을 효과적으로 수립할 수 있습니다(참고: 다른…

더 읽기
Release

오늘부터 로스팅 머신과 호환되는 모든 로스터에서 크롭스터 가스 제어 및 재현이 지원됩니다.

마침내 많은 고객이 요청해 온 기능이 출시되었음을 알려드리게 되어 매우 기쁩니다. 오늘부터 로스팅 머신과 호환되는 모든 로스터에서 크롭스터 가스 제어 및 재현이 지원됩니다. 호환되는 이유가 궁금하신가요? 로스팅 인텔리전스는 범용 로스트 프로파일러이기 때문에 수많은 머신에 연결할 수 있습니다.

초창기에 모든 제조사들이 어려워하던 프로파일 생성을 크롭스터가…

더 읽기

뉴스레터를 구독해보세요.

다음의 업계 종사자를 의한 솔루션에 대한 더 자세한 내용을 확인해보세요.