Blog posts

Connecting your roast machine to Cropster quickly and easily

So you’d like to take your roasting to the next level? Here we will discuss the different ways you can hook up your machine to Cropster.

Let us start by saying: If you can roast with it, you can use Cropster with it.  Here is a list of just some of the roasters that we have connected to Cropster already:

Giesen - Loring - Diedrich - Probat - Coffeetool - Proaster - San Franciscan - IMF - Bühler - Toper - Has Garanti - Atilla - Garanti - Petroncini - Joper - US Roasters - Gothot - Ambex - STA - Renegade - Brambati - Huky - Quest - Coffee Tech - Roastmax - Victoria - Bella Taiwan...

With that being said, let’s go over how you may go about doing this with your machine.

Method One: Plug & play

Cropster provides plug & play, no-hardware solutions for the following roast machines:

  • Loring Smart Roasters
  • Giesen Coffee-Roasters built after June 2014 (ex. W15A)
  • Coffee Tool Roasters with a PLC

These machines do not require any more setup than simply plugging an ethernet cable directly from your roaster to your computer (although some manufacturers do charge for an unlock code to do this). By doing so, we connect to the machine’s computing unit directly. This setup process takes seconds. 

Also, many new machines (Proaster, San Franciscan, Diedrich etc.) come standard issued with connectors which makes the setup process as simple as connecting your roaster and computer via USB cable.

Method Two: Via the Cropster Connector

Connecting via the Cropster connector

Good news! You’re about to learn a few interesting things about your roast machine. First, Cropster can integrate with any other roaster that has ungrounded thermocouples (K, J, E or T type) or RTD temperature sensors via a Cropster connector - what does that mean? Read on. It’s simpler than it sounds. These terms cover 99% of the roast machines we know of. The Cropster Connector is a small device that can track up to four temperatures at the same time which equates to either one production roaster or multiple barrels on a sample roaster. Hooking up your roaster to this connector is quick and easy and takes 30 minutes or less including time for a coffee. 

Here is a little bit of information on each type of setup. 

A) Ungrounded Thermocouples: K, J, E and T

The vast majority of drum roasters use K or J type thermocouples--K type being the more popular of the two.  If you aren’t sure what type of thermocouples you have, send us a photo of your probe wires (similar to the photo below) and we’ll tell you what you have. To find them, simply locate your temperature probe and follow the wires from it to the other end. Then take a photo of the wires at their connection point. Their colors will tell us more about their type and let us know what type of wire we might need to send for you to extend this connection to the Cropster Connector.  Also, to speed up the process, please let us know the make and model of your roaster, and the year it was produced.

K type thermocouples

Above: K type thermocouples in a Probatino. The green/white insulation colors indicate that these probes are manufactured to European standards and are K type.

Another example for K type probes

Above: Another example for K type probes. Red/yellow colors indicates American standard K type probes 

B) RTD Sensors: PT-100/PT-1000

Unlike thermocouples, extending an RTD probe signal from a digital readout and feeding it into our Cropster Connector is bit more complicated. Bypassing your current digital readout can affect emergency shutoff and alarm systems in some machines. Because of this, we recommend installing a replacement dual/duplex probe. That way you gain an extra set of leads dedicated to Cropster while the other set feeds into your existing system. We believe this is a win-win for you. Dual probes can be sourced pretty easily at reasonable prices.

A standard RTD connection in a refurbished old roaster

Above: A standard RTD connection in a refurbished old roaster. RTD wires typically have 2-4 wires per readout with red/white insulation and only require 2 for a Cropster readout.

If you can roast with it, Cropster can help you get more from it.

Connecting your roast machine to Cropster is the first step toward leveraging green coffee and roast production management tools, roast profiling tools, roast compare reports and QC features. The minutes invested in connecting a roast machine to a tool like Cropster will pay off every time you use the machine and every time you work on a process around the machine. That’s the beauty of connecting your roast machine to a system that can grow with you and your business.

Still happier handling the beans than dealing with the tech?

We have a support team standing by who are more than happy to walk you through the entire setup process. We will even help you source replacement probes and hardware if you need it! Just contact us and we’ll get you up and running asap.

更多最新消息

New releases

Between batch protocol for coffee roasters - the whats, whys and hows from experts

If you roast coffee, you know that Between batch protocol is an important component of consistency and many other parts of the roasting business. As part of our work to help roasters improve their…

浏览更多
New releases

烘焙与人工智能相结合的下一个重要功能来了——一爆预测!

Cropster 对 Roasting Intelligence 智能烘焙 4 进行最新更新,在人工智能 (AI) 的基础上推出一爆预测功能,该功能指示一爆的可能发生时间,方便您据以进行烘焙规划。 继续阅读全文。

浏览更多
New releases

最新發布:鍋間流程 - 穩定烘焙的秘密

我們很興奮地向大家宣布,Cropster 的又一新功能 ——「鍋間流程」來了!減輕烘焙師們的工作量,使最關鍵的業務信息愈加易於收集、訪問及分析。

浏览更多

订阅我们的新闻邮件

了解为以下人士提供的解决方案

Here should be a form, apparently your browser blocks our forms.

Do you use an adblocker? If so, please try turning it off and reload this page.